Skip to main content

Fabricate a round-bale holder at home

Round bales are a cheap way to buy hay for stock when the grass dries off in winter or if you're keeping them in the yards.  Round bales without round bale holders don't last more than 24 hours with our cattle!  They tend to pull the whole thing apart and then lie down in it, poo in it and refuse to eat the rest.  It makes a very expensive pile of mulch!  With a good round bale holder, most of the hay will be eaten and only the stalks are discarded, but the holders are expensive to buy, around $400 in our area.

Before we owned a round bale holder (and after making a few expensive piles of mulch) we made a quick and cheap version using three cattle panels arranged in a triangle around the bale.  Farmer Pete made one of the panels with wider rung spacing so the cattle could poke their heads through.  This worked quite well, as a triangle is very strong and the cattle couldn't push it over, but it wasn't ideal for them to access the hay (and we needed the panels for our yard).

Later, when we were very busy and in need of a round bale holder, we bought the simple one pictured below.  It is made from three pipe hoops, pipe uprights and mesh at the bottom to stop the hay from spilling out.  It works very well, but with the new property we needed a second round bale holder and didn't want to pay for something that we could make, now that we had more time to work on it.


The difficulty with fabricating a round bale holder is bending the pipe into a circle, as this requires expensive bending equipment that we don't have access to.  Farmer Pete decided to make it as a hexagon instead.  We used a bit of geometry to work out the length of the sides and angles required to fit in a 3 foot bale and Farmer Pete made the cuts and easily bent the box section into shape.  Then we did some really tricky geometry and made the holder at the right height for the bale with diagonal risers between each centre and corner.  This stops the cattle putting their head in and tossing the hay around.
hexagon geometry
This image was very useful
- see http://www.codeproject.com/Articles/14948/Hexagonal-grid-for-games-and-other-projects-Part-1 

The finished product

Frank inspects the new geometric art installation in his paddock

The sculpture is more popular when its filled with hay!
Do your cattle waste round bales?  How do you feed them out?

Comments

  1. I like the looks of your bale holder better than the store bought one. Our old farm has pieces of old holders scattered around where the cheap metal has rusted out and the cows and farm hands have destroyed what was left. I suspect that your model is better constructed than what we have. Good job!

    ReplyDelete
  2. That's very impressive!! Did you weld it together and then paint it? Looks super professional. Well done Farmer Pete.

    ReplyDelete
  3. Farmer Pete is a gem! Well done :)

    ReplyDelete
  4. thanks everyone, its always handy to have a professional metal worker around for jobs such as these :) We will have to try to look after it, the cattle have chipped off most of the pain already, but it did look nice for a while!

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

How to make soap with beer (and tallow)

I may  have mentioned this before.... soap making is addictive!  Once you start, you just want to keep making more soap.  And not the same soap, you want to try all sorts of different soaps.  I made the mistake of joining a facebook group called Saponification Nation  and now my facebook newsfeed is full of glorious soaps, in all colours and shapes, which makes it even harder to resist the urge to experiment.  One soap that kept popping up a few weeks ago was soap made with beer. I generally prefer not to use ingredients just for the sake of it, I like to know that they are adding something to the properties of the finished soap.   As you know, I don't like to use artificial ingredients either (colours or fragrances).   When I read about beer in soap I found out that beer adds sugar to the mixture, which increases lather.  I use tallow in my soap, which has limited lather, so anything that adds lather could improve the soap.  It also contributes a tan or brown colour to