Skip to main content

Knitting socks on four double-pointed needles

Around this time last year, Linda from the Greenhaven Goodlife kindly sent me some wool and needles to make socks as part of her one year anniversary giveaway following on from Linda's own sock knitting successes.  I made several attempts to start the first sock and I got this far before I put away the knitting in summer.  When I pulled out the sock to start again, I tried it on and realised that it was going to be one very long sock.  I think I added a lot of stitches as I went around and got all mixed up with ribbing the fine yarn.  So I unravelled the whole thing and thought about starting again.
The first sock was going to be very long
But this time I thought I'd better find the right pattern.  I was trying to use the pattern that was on the yarn label, but that was for five needles and Linda only sent me four needles.  In hindsight it probably would have been easier to just buy myself five needles, but I was determined to just use the four, so I went looking for a pattern.  All my pattern books and most of the free patterns on the internet used five needles, but I found a youtube video with four needles, so I knew it was possible.  I finally found a pattern, and it suggested using a thicker yarn for your first sock attemp, and I thought I'd better just stick to the pattern for my first sock and then I might be able to work out how to use the yarn that Linda sent me after that.  It was good advice because thicker yarn does knit up very quickly and its far more satisfying that going around and around with thin yarn.

The pattern was a little bit confusing, but I found some good youtube videos that really explain the sock process in general, and on four needles.


Putting it all together, this is my version of a simple sock pattern for four double pointed needles.
At any one time, the stiches are distributed over three of the needles, with the forth needle used to knit the stitches and then become part of the three in use, while the one that had the stitches becomes the spare needle…. you’ll see what I mean when you start knitting!  Also this tutorial might help.


To start the sock you need to cast on.  The number of stitches you need is going to depend on the yarn weight, the needle size and your foot size, and it must be divisible by 4 so that the rest of the pattern works.  For example, I used 9ply, 2.5mm needles and a size 8 women’s foot, which worked just perfectly with 40 stitches.  Now that I know that the sock needs to be about 4 inches across, I can use different needles and yarn to produce about the same width, as long as the number of stitches divides by 4.  See this generic sock pattern for more info on the number of stitches you need.

After casting on 40 stiches, for example, they are then split between the three needles in use, half on one needles and a quarter on each other needle.  You then work around to form the cuff.  Usually this starts with a ribbing stich – knit one, purl one, or similar, until the desired length of ribbing is completed, followed by knits until the cuff is long enough. 


Next comes the heel flap.  This is created by working only the needle with half the stitches on it, in alternate rows of knit and purl, instead of going around and around.  When the heelflap is the same number of rows as the number of stiches on the needle, we start to “turn the heel”.  This is done by decreasing the stiches towards the outside edges of each row.  There are lots of different ways to turn the heel, I just follow the pattern carefully and am amazed when it works.  For different numbers of stitches, refer to this site.



When the heel is turned, you need to then pick up all the stiches along the edge of the heel flap and start to reduce the stitches to create the gusset.  With the right side of the work facing you, and yarn on the right hand side of the needle, use the spare needle to pick up the end of each heel flap row and knit it onto the needle with all the heel on it.  Then knit around the other two needles (its easier at this stage if you put all these stiches on one needle) and continue to pick up the other side of the heel flap.  Now you need to re-arrange the stiches so that half of your original number of stiches (in this case 20) on the top of the foot are on one needle (already done if you followed my suggestion above) and then half each of the remaining stiches are on each of the other two needles.  In this case, if you reduced your heel flap to 12 and picked up 30 stiches on each side of the flap, you end up with 72 stitches in total, 36 on each needle.  Now you form the gusset by reducing the number of stiches on each of the 36 stitch needles at the end that joins to the 20 stitch needle.  Working around, the first decrease one is a SSK, the second is k2tog. 

For example:
Needle 1: Knit to last three stitches, k2tog, k1
Needle 2: Knit even
Needle 3: K1, SKP, knit to end of needle


Continue until you have the original number of stiches back on the needles.  In this case it will be 20 stitches on the top needle and 10 on the other two needles.  Now you just work around and around, try on the sock occasionally and continue around until you reach about 1 inch from the toe of your foot.

Now its time to form the toe of the sock.  This time you decrease on the top and bottom of the sock.
Needle 1: knit to last 3 stitches, k2tog, k1.
Needle 2: k1, ssk, knit to last 3 stitches, k2tog, k1.
Needle 3: k1, ssk, knit to end of needle.
Work an even round.



Alternate decrease rounds and even rounds until about a quarter number of original stitches remain (in this case 10, but as you remove 4 stitches at a time, it works out to be 12 remaining) and distribute these evenly on 2 needles to finish the sock.  Again, there are a number of ways to finish a sock, I found kitchener stitch was ok as long as I had a few minutes to concentrate and say the stitches out loud!

Is it worth the effort?
Yes!  Once you get through the first one or two socks, and understand the pattern, it becomes very quick and easy to generate socks.  They are fiddly, but they are small, so its not a huge project to take on and you get rewarded with a finished sock relatively quickly.  It’s a wonderful feeling to know that you can create a sock, that you will never have to buy socks again, and that something that seemed so complicated is now easy suggests that maybe you could knit just about anything if you just sat down and concentrated for long enough!  Now that I’ve mastered socks, I finally feel ready to try that vest.  Actually all the techniques I need for the vest are found in a sock - ribbing, decreasing, knitting in the round, picking up stitches to do the arm-holes.  I'm feeling quite confident now!  I never thought that I would recommend socks as a beginner knitting project, but they are so quick, and not much to unravel if you make a mistake, its worth a try once you're ready to tackle reading a pattern.

Have you or do you knit socks?  How many needles do you use?  Any tips?

Comments

  1. Oh that is more than my head can handle this afternoon. It is fascinating but I am sure it all comes together if you can get it in your head. Good for you!

    ReplyDelete
  2. I like four needles, CAN'T STAND circular needles and what I really like about sock knitting is they are so portable. You can take them to Dr appointments or sport events and aside from the shaping part there is not much counting. Don't know that I would suggest them as a beginner project though, I think you have more tenacity than the average beginner.

    ReplyDelete
  3. Oooooh! I'll have to give these a go. I reckon it was taking me about twenty hours to knit a pair of the other socks! It will have to be a project for later though. I'm knitting Buddy Boy a jumper. Funny, everyone says you can't knit socks as a beginner but a bit of sheer determination goes a long way. I can knit a sck but I'm having trouble with a simple jumper pattern. Lol!

    ReplyDelete
  4. I love knitting socks!!! At the moment I am making knitted and fulled bags for the market I hope to do in September, but I will get back to socks for sure. I only wear my own handmade socks now, I wish I could get the rest of my family to wear only my socks too, oh well, one day.

    ReplyDelete
  5. I imagine it is easier to fit when you use your foot to hold it together while knitting. :)

    ReplyDelete
  6. Reading the instructions for knitting socks is way more complicated than actually knitting them. I switch between four and five needles when I make socks, just because I get bored. Like your socks.

    ReplyDelete
  7. My winter knitting projects have all been socks this year. I've been using 5 needles and although it's a bit fiddly until there is some weight of knitting on the needles I find it good as it clearly sets up a top, bottom and sides of the sock so it helps me make sense of where I'm at in the pattern. I love your striped sock, you should definitely make another (slightly shorter?) pair with that wool!

    ReplyDelete
  8. I do knit socks some and I also use 4 needles but I do my heels a bit differently than you do. I never could quite figure out that method so I use an easier one (but I don't know if it is as good).

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

How to make soap with beer (and tallow)

I may  have mentioned this before.... soap making is addictive!  Once you start, you just want to keep making more soap.  And not the same soap, you want to try all sorts of different soaps.  I made the mistake of joining a facebook group called Saponification Nation  and now my facebook newsfeed is full of glorious soaps, in all colours and shapes, which makes it even harder to resist the urge to experiment.  One soap that kept popping up a few weeks ago was soap made with beer. I generally prefer not to use ingredients just for the sake of it, I like to know that they are adding something to the properties of the finished soap.   As you know, I don't like to use artificial ingredients either (colours or fragrances).   When I read about beer in soap I found out that beer adds sugar to the mixture, which increases lather.  I use tallow in my soap, which has limited lather, so anything that adds lather could improve the soap.  It also contributes a tan or brown colour to