Skip to main content

Soil testing for dams, roads and erosion control

I started a series on soil testing back here, in which I explained a few simple tests to work out the clay/silt/sand content of soil and the pH.  I was always going to come back and explain dispersion, but the truth was, I didn't really know WHY dispersion was important at that time.  I have since done a course on erosion management and it all became clear.  However, dispersion is not really important for garden soil or for farming, so I never came back to finish the series.  Dispersion is very important when it comes to using soil to construct things like dams and roads, and when you start to get erosion problems.  We just had a dam built, so I came back to dispersion and soil testing, so its time to finish that series!

eight acres: simple soil tests for building dams, roads and preventing erosion.


We asked our neighbour to come over with his buldozer and build us a farm dam near the house.  He thought that the soil wouldn't be any good where I wanted the dam.  So throughout the digging process we grabbed multiple samples and looked up websites and tried to figure out if the dam was going to work.  

This link from the Victorian state government listed the following qualities of good soil for dam building:
  • more than 10% clay
  • more than 20% silt plus clay
  • presence of sands and gravels in reasonable quantity to supply structural strength.
  • Clay with moderate dispersion. Some dispersion is necessary to have sufficient mobility to help seal pores without causing tunnelling.
Soil texture
As I wrote previously, you can roughly assess the clay and silt content of soil through what I call "the sausage test" (which is actually called the manipulative test), and the test where you shake up a sample in a jar of water and let it settle.  Both tests indicated that we had enough clay in the soil.  Using the results of our tests and the standard soil texture triangle, we estimated the soil to be a sandy loam, and therefore it met the first three requirements on the list.

Next we had to test dispersion.  This document from the NSW DPI explains dispersion and slaking.  Dispersion is a measure of how the soil behaves when exposed to water.  You test it by gently placing a chunk of soil in a dish of water (in this case the dog's water bowl, sorry Taz!) and watching the soil.  A dispersive soil will begin to spontaneously dissolve in the water, whereas a non-dispersive soil will show no signs of dissolving.  Moderate dispersion will form a dirty ring around the soil.  A slaking soil will fall apart.  A soil can be slacking and non-dispersive.  Anyway, after several tests it looked like our soil was slaking and slightly dispersive.  If it was too dispersive it would have just dissolved into the water in the dam and not sealed, no dispersive enough and the dam won't seal either.

eight acres: simple soil tests for building dams, roads and preventing erosion.


Will the dam hold water?
We told our neighbour to keep digging!  And we kept taking samples as the hole got bigger.  The thing with dams is you never really know what you're going to find as you keep expanding the hole, and there were a few different colours which our neighbour tried to mix to create a consistent layer on the dam wall. If you're planning to dig a dam, I recommend finding an experienced operator.  We won't know if we made the right decision until we see that dam full of water and holding its level.

We have previously had the same neighbour work on our driveway and went through the same soil testing.  For a road, you want less clay and silt, more gravel and sand, and non-dispersive soil to prevent erosion.  The key to erosion control is a good layer of top-soil or non-dispersive soil anywhere that will be exposed to water, as dispersive soil will literally dissolve.

None of this is very scientific, but it does give you a rough idea of what type of soil you're working with and what you might be able to us it for.  And its kind of a fun opportunity to get your hands dirty!  If you want to know more about your garden soil, see what I wrote here.

What do you think?  Have you used soil testing to estimate soil texture?  Have you built any dams or roads lately?

Comments

  1. We have a lot of clay in our soil in Michigan. Makes it hard to have a good garden sometimes. Interesting post!

    ReplyDelete
    Replies
    1. I know what you mean. Check ou my post on garden soil - organic matter is the key!

      Delete
  2. When we had the dam dug here we got someone in who had been doing it for decades so he knew what he was doing, dug down a metre or so and still clay but we wanted a deeper dam just below the 2 metre mark it was decomposed granite so we ended up with a larger dam as he got the clay from the sides and packed the clay into the bottom, first decent rain and it filled up and held OK

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

How to make soap with beer (and tallow)

I may  have mentioned this before.... soap making is addictive!  Once you start, you just want to keep making more soap.  And not the same soap, you want to try all sorts of different soaps.  I made the mistake of joining a facebook group called Saponification Nation  and now my facebook newsfeed is full of glorious soaps, in all colours and shapes, which makes it even harder to resist the urge to experiment.  One soap that kept popping up a few weeks ago was soap made with beer. I generally prefer not to use ingredients just for the sake of it, I like to know that they are adding something to the properties of the finished soap.   As you know, I don't like to use artificial ingredients either (colours or fragrances).   When I read about beer in soap I found out that beer adds sugar to the mixture, which increases lather.  I use tallow in my soap, which has limited lather, so anything that adds lather could improve the soap.  It also contributes a tan or brown colour to