Skip to main content

Trimming old doors (for our new floors!)

We had our new floors laid a few weeks ago and before that we had to take all the doors off their hinges and trim them to make sure that the would open over the new floor.  If you just want to see what our new ironbark hardwood floor looks like, skip to the end.  I searched the internet for clever ideas for trimming doors and there is a special power tool you can buy called a "door trimmer" (of course), but it doesn't seem to be common in Australia and we didn't want to buy another power tool just to do one job (it looks like you can hire them in other countries).  It does look like it would be very useful if you had a lot of doors to trim, something a builder might invest in.  

Without a door trimmer, our only other option was to take each door off its hinges, trim it and rehang it.  We were not really keen on removing hundred year old doors, but we had no choice.  Luckily it was easier than expected.  First Pete cleaned the paint off each hinge using a wire wheel on an angle grinder.  This made it easier to get to the screws, which he then removed with a battery powered drill.






I helped to carry the doors into the lounge where we had two saw horses to sit the door on.  Pete marked the bottom of the doors (we decided to trim each door by 10mm to ensure that they would open over the new floor, even if the house moves slightly).  Pete then clamped a piece of metal flat section to the bottom of the door to use as a cutting guide, and a circular saw to trim the bottom of the door.







Then I helped to carry the door back to where it came from and held it straight while Pete screwed the hinges back in.  We found that some doors had bits of cardboard used as packing, which we replaced with new cardboard to keep the door square.  All of the doors looked better after being trimmed.  One door in particular has a frame that is completely out of square and there was nothing we could do about it, but that's the joys of working on an old house!

When we were finished I called the floor people, and let them know that we were nearly ready.  We had left a deposit six months ago and they were waiting for us to confirm our installation date.  I was very surprised when they said they could come the following week!  We rushed to finish painting the window frames and doors in Dulux "Light Leather".  Even though they looked lovely in the white primer, I knew that it would be impossible to keep them white, so practicality won and we painted them a mid-brown colour.  I like the way it frames the view of trees outside.

The new floors are 10mm thick ironbark "tongue and groove" boards laid over the existing hoop pine.  We looked at having the hoop pine sanded, however it was never designed to be walked on, being a soft timber, they have always been covered with rugs, carpet or lino.  The boards had big gaps in them (you could see the ground through some of the gaps!) which would have been a lot of work to fill. We thought about tiles, but they are better suited to concrete slabs, not wooden houses on stumps that shift (we have tiles in the bathroom and laundry only, just small rooms).  We are not fans of carpet (I HATE vacuuming) or lino (plastic!), but when we found out that we could get hardwood floorboards (not "engineered", but natural wood boards), we thought that was a really good option for this house.  

The wood boards will move with the house.  The colours in the wood suit the house and environment outside the windows.  The additional layer of floor will add insulation and it has definitely strengthened the floor (footsteps at one end of the house can no longer be felt at the other end of the house).  We can re-sand and polish the wood at any time.  Speaking of sanding, the boards are yet to be sanded and polished.  We have chosen a penetrating wax rather than a lacquer product.  If the floor gets scratched we can just sand back a small patch and re-polish it, which is pretty difficult to do with a lacquer.  The floors will be finished as soon as the skirting boards and kitchen are done.  Unfortunately our chosen kitchen maker is very busy, so this might be early next year (he is very highly recommended, so worth the wait I hope).

new floors in the side room

new floors in the lounge/hallway

What do you think?  Have you even tried to trim old doors?  Have you had a new floor laid?  



Comments

  1. Liz, our house has moved and needs restumping badly. One door in particular won't shut properly so my hubby cut some wood off the bottom of it. Not a good idea as it still won't shut. The restumping will just have to be done soon and I just have to find someone with a good reputation who will do a good job. The joys of living in an old house :-)

    ReplyDelete
    Replies
    1. That is frustrating! I recommend the house removal company that we used - Burnett House Removals. They also do restumping, very professional and best tradesman we've dealt with so far.

      Delete
  2. Gosh I love that side room - what direction is its aspect...shade or sun?

    ReplyDelete
  3. I like the trim colour. I have a 'door trimmer' Liz, I just can't get him started. ;-) Seriously though we do have a door that needs to be taken off its hinges and trimmed so the final piece of floor edging that needs to be installed under the existing door can be put in place. That job is on the list. I love the way your home is coming together and I really enjoy reading the updates.

    ReplyDelete
  4. A common job for me I'm afraid! One of thsoe jobs where it can go easy or be a right pain. I do it in much the same way only have a fancier saw!

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

How to make soap with beer (and tallow)

I may  have mentioned this before.... soap making is addictive!  Once you start, you just want to keep making more soap.  And not the same soap, you want to try all sorts of different soaps.  I made the mistake of joining a facebook group called Saponification Nation  and now my facebook newsfeed is full of glorious soaps, in all colours and shapes, which makes it even harder to resist the urge to experiment.  One soap that kept popping up a few weeks ago was soap made with beer. I generally prefer not to use ingredients just for the sake of it, I like to know that they are adding something to the properties of the finished soap.   As you know, I don't like to use artificial ingredients either (colours or fragrances).   When I read about beer in soap I found out that beer adds sugar to the mixture, which increases lather.  I use tallow in my soap, which has limited lather, so anything that adds lather could improve the soap.  It also contributes a tan or brown colour to