Skip to main content

Stairs for our removal house

When we moved our new old house to Cheslyn Rise last year, the one thing that the removalist would not do was replace the external stairs. At first I wondered why, but when the house was settled in its new location, it was obvious that the old stairs were the wrong height! The thing with a removal house, is that it generally gets set up differently in its new location, different orientation, different height, so it needs different stairs. We had thought of just modifying the old stairs, but they were in terrible condition, quite rotten, which is another reason the removalist would not want to reinstate them.

The house in its original condition - the old ramp
More original house - old wooden stairs

For several months we had a house perched about a metre above the ground with no stairs! The poor plumbers and electricians had to climb in and out of the doors until we had a chance to build the stairs. It took us a while to get the stairs organised because we are hopeless at making decisions and because its actually quite tricky to do.

the house when it first arrived - floating!

First we decided to get rid of the ramp that used to go up to the veranda because to meet modern building requirements for ramp slope it would have had to wrap right around the house! We moved a handrail and put in a set of lovely wide stairs in a different spot instead. From the “sunroom”, the door previously opened out directly onto stairs, but this is also not allowed anymore, so we had to build a platform to step out onto instead. To make things even more complicated, each set of stairs was a slightly different height due to our uneven house pad and the different starting points, but we wanted to try to keep all the stair tread spacings consistent to prevent tripping when using different stairs.

working on the front steps

The front steps - finished
The most important thing for a new house is comply with local building codes. In Australia, we have to comply with the Building Code Australia (if you are modifying an existing house and don’t HAVE to get building approval this is optional, but can be used as a guide to good practice, don’t get me started on how much I hate having to comply with building codes!). Pete had made industrial stairs before and was prepared for some tricky precision welding work, but fortunately the residential code is more lenient than the industrial code, although it still reads like some kind of logic problem. You should read the code for yourself, but the most important points that we needed were:

  • Ensure that your design will be within the riser (vertical distance between treads), going (horizontal distance between treads) and slope requirements
  • A 125mm sphere must not pass through a riser opening – remember to take into account the thickness of your treads as well as the riser spacing

As we were considering different tread options (used vs. new), which were different thicknesses and widths, and different numbers of treads for different heights of stairs, it did get complicated! We worked it out roughly using a spreadsheet with the different options (who would have though trigonometry would be useful after highschool?!), to give us an idea of how many treads and the distance from the house to the bottom of the stairs for each set, but in the end we had to draw out each set of stairs on a large piece of plywood just to make sure we had it all right before Pete started cutting and welding it all together.

working on the kitchen stairs


more kitchen stairs progress

the kitchen stairs finished

We bought standard tread brackets from a welding supplies store (for cheaper than you would make them) and Pete cut the stringers from galvanised RHS. He made brackets at the top for attaching the stairs to the house (remember that the distance from the veranda/platform etc onto the top step must be the same as the distance between each step and again with the bottom step to the ground!). And at the bottom he attached a vertical length of RHS which we cemented into a 50cm deep hole.

For the short stairs, we bought a flight of eight steps from the removalist we used, and we were able to use 3 for the sunroom stairs and 5 for kitchen stairs. They were unpainted except for a little stripe on each side, so Pete sanded them and they came up like new. For the longer stairs at the front of the house, we bought 4 new treads made by a local saw mill. Again, Pete had to sand these to prepare them.  For the platform, we took decking boards off the old ramp and cut them to suit.

the back "platform"

working on the back stairs

The platform finished (it does have handrails though)

It took us several weeks to install each set of stringers, cement a pad at the correct height under each set, sand and prepare the treads, and finally install them on the stringers and seal them with wood oil. I am so glad we bought a second hand cement mixer, no more mixing in the wheel barrow!

It was a wonderful feeling to see the new stairs finished. Not only is access greatly improved, but it looks inviting, I love the long stairs that we put on the front.

Have you built stairs?  Any tips to add?

Simple Saturday Blog Hop
Clever Chicks Blog Hop
From the Farm Blog Hop
Homestead Barn Hop
Homeacres Hop

Comments

  1. I was nodding my head while reading this. We haven't needed to build stairs before, but have made many a design decision before mixing cement for other projects. I've also underestimated how long it would take to finish a project, and we're often weeks behind! I figured-out I was being too ambitious with the schedule, when it happened every time, lol. Things like wet weather, an unexpected shift at work, or getting sick, they all jump on the work schedule, even though I didn't plan for them.

    Now it's a matter of having a rough schedule, but it gets finished when it gets finished.

    I bet you're glad the stairs are over with - at least the design side of it. Well done team. :)

    ReplyDelete
  2. Hooray for having easy access. Pete did a great job no doubt with your expert guidance, which lets face it is a wife's job in these matters.

    ReplyDelete
  3. It's all looking great...I know stairs is one of those funny things that a layman (a non builder) just thinks, buy them and pop them on but there's a whole lot of more going on than that. I think getting your second hand cement mixer was a very clever idea. Onwards and upwards, or is that upstairs, downstairs (ha ha). Regards Kathy A, Brisbane, Australia
    www.oursimpleandmeaningfullife.blogspot.com

    ReplyDelete
  4. It's funny the things you pay attention to once they have been pointed out...I'm off to contemplate stairs :-)

    ReplyDelete
  5. Thanks for the comments, yes it is a relief to have them done and looking nice as well, and now I will never look at stairs the same again!

    ReplyDelete
  6. I've enjoyed reading your progress on your house! The stairs look good! Thanks for sharing your post on the HomeAcre Hop, hope to see you again tomorrow! - Nancy The Home Acre Hop

    ReplyDelete
  7. Oh my, who knew stairs could be so complicated? I had no idea.

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

How to make soap with beer (and tallow)

I may  have mentioned this before.... soap making is addictive!  Once you start, you just want to keep making more soap.  And not the same soap, you want to try all sorts of different soaps.  I made the mistake of joining a facebook group called Saponification Nation  and now my facebook newsfeed is full of glorious soaps, in all colours and shapes, which makes it even harder to resist the urge to experiment.  One soap that kept popping up a few weeks ago was soap made with beer. I generally prefer not to use ingredients just for the sake of it, I like to know that they are adding something to the properties of the finished soap.   As you know, I don't like to use artificial ingredients either (colours or fragrances).   When I read about beer in soap I found out that beer adds sugar to the mixture, which increases lather.  I use tallow in my soap, which has limited lather, so anything that adds lather could improve the soap.  It also contributes a tan or brown colour to