Skip to main content

Following a knitting pattern - first steps

Now that I have mastered socks, I decided it was time to start on the vest that I have been wanting to make since I started knitting a few years ago.  I have been collecting vest patterns from the op shop, this booklet was 20c.

cheap knitting pattern booklet
There's a few things to look for before starting a new pattern.  First look at the sizes and figure out which size you will be knitting.  I then go through and underline the stitches for the size I'm making.  Next check that you have everything you need.  This pattern specifies 8 ply yarn (the ply is the thickness).  The ply should be written on the wrapper, if you buy yarn from the market like I do, and it doesn't have a wrapper, you can work it out roughly by wrapping the yarn around a needle and measuring the width of a set number of loops, for example here.  This pattern also uses 4mm and 3.25mm needles, you can check your needle sizes with a ruler.  The most important part though is the gauge or tension.  This is the number of stitches per cm, on the specified needles, for example this pattern has a tension of 22.5 stitches per 10cm in stockenette stitch.  I stitched up a nice size 22 stitch swatch just to be sure.  Mine was just over 10cm, which means that my vest will turn out a little bigger than the pattern, so I chose a slightly smaller size that normal.

reading the pattern
Finally, check that you have enough yarn.  The pattern will list the yarn requirements for each size pattern.  For this one I need 6 50g balls of 8 ply, and as the yarn I want to use is in 100g balls, and I have 4 of them, I think I'm pretty safe.  Nothing worse than running short on yarn, especially if its from the markets and you probably can't get any more the same!

Its also a good idea to read through the pattern and make sure you can follow most of the steps.  I tend to read each step in detail as I come to it, otherwise I get confused by steps that I'm not up to yet, but it does help to have a rough idea of what is coming up next.  Then just focus on completing each step as accurately as possible.

checking the tension
Having done all that, its finally time to start casting on 105 stitches!  Wish me luck!  Any tips for starting a knitting pattern?

Clever Chicks Blog Hop
Simple Saturdays Blog Hop
From the Farm Blog Hop
Homestead Barn Hop
The HomeAcre Hop 

Comments

  1. Good luck! I think you're going about it the right way. Read only a couple of steps ahead rather than the whole thing so that you don't get overwhelmed. Looking forward to seeing your progress.

    ReplyDelete
  2. I like to go through a pattern and mark the instructions for the size I am making. Nothing is worse than realizing you are working on "large"number of stitches for your "medium" sweater! Vests are fun to make.

    ReplyDelete
    Replies
    1. yes exactly and usually I'm trying so hard to get everything else right, its easy to make a simple mistake and have completely the wrong number of stitches!

      Delete
  3. Thank you for sharing at the HomeAcre Hop! I hope you'll join us again this Thursday.

    Kathi @ http://www.oakhillhomestead.com

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

How to make soap with beer (and tallow)

I may  have mentioned this before.... soap making is addictive!  Once you start, you just want to keep making more soap.  And not the same soap, you want to try all sorts of different soaps.  I made the mistake of joining a facebook group called Saponification Nation  and now my facebook newsfeed is full of glorious soaps, in all colours and shapes, which makes it even harder to resist the urge to experiment.  One soap that kept popping up a few weeks ago was soap made with beer. I generally prefer not to use ingredients just for the sake of it, I like to know that they are adding something to the properties of the finished soap.   As you know, I don't like to use artificial ingredients either (colours or fragrances).   When I read about beer in soap I found out that beer adds sugar to the mixture, which increases lather.  I use tallow in my soap, which has limited lather, so anything that adds lather could improve the soap.  It also contributes a tan or brown colour to