Skip to main content

Using compression fittings on poly ag pipe

If you want to move water from one place to another on your property, you will probably use poly pipe, or "ag" (agriultural) pipe.  Ag pipe comes in a range of sizes, from 3/4 inch to 2 inch nominal diamer, and in high and low pessure ratings (900 and 800 kPa respectively).  The larger the diameter, the more you will pay for the pipe and the fittings, but the less energy you will need to pump water through the pipe for a given flowrate.

When you have decided what size pipe and which pressure you want, you will probably need some fittings.  The fittings are "compression" fittings, which means they use a "ferrule" and an o-ring compressed to the pipe to seal the fitting.  (Would you believe that there is a Wikipedia article that explains this?).  When buying fittings, make sure you get the right size, and the right pressure rating, as its very difficult to get the high-pressure fittings to work with the low-pressure pipe! The high-pressure pipe has thicker walls, so it needs different fittings. Also try to stick to one brand so that you can swap the parts around.

If you need to connect to a tank, a trough or a pump, for example, you will probably also need a normal screw-in fitting, so you will have a compression fitting on the end that connects to the pipe and a screw-in fitting on the other end.  You may also then need other bits and pieces to change the size (reducers and expanders).  Pete is really good at picking through all the bits in the ag supply store and building a fitting that works (they don't always have exactly what we need), don't be afraid to mix and match, often there are a number of possible options, so play around until you find the easiest or cheapest way to what you need to do.

Pete is also good at installing the fittings, which he did when we connected the 900m of ag pipe in 100m sections from our solar bore pump to the highest point on our property.  You will need a hack-saw, a file and a soft mallet (and a lot of patience if someone is taking photos of every step, this post was made possible by Pete!).




First cut the end of the pipe square with the saw.  Then file any rough edges inside and outside, to make sure the pipe will seal evenly.  Pete has a clever scraper tool to do the inside, but a file would also work.  Then slip the outer compression nut (the big piece on the right in the photo below) onto the pipe, then the ferrule, and then gently tap the inner piece into the pipe (it might need some force, but try not to damage it and don't lose the o-ring).  Finally, you can screw the outer compression nut into the middle part of the fitting (far-left).  It doesn't need to be extremely tight, because its actually the ferrule and the o-ring that are sealing the pipe, and you might want to get it undone again one day, so just tighten it without using any tools for extra leverage.  When you have finished, you can check for leaking fittings and tighten more if required.

(left to right: the middle part, the bit that goes inside the pipe, the ferrule,
and the outer compression nut)

The only trouble we have had with these fittings is trying to combine low and high pressure fittings and pipe, and when the ag supply store doesn't have exactly what we need.  Now we know what to look for, its been much easier!  And now we try to stick to one brand, so that we can interchange parts.  We installed t-sections on all the joins this time, so that we can connect to troughs if we want to, but we could also remove the t-sections and install blank joiners later if we want to.

Have you used compression fittings for ag pipe?  Any tips?

Here's the step-by-step photos

eight acres: how to use ag pipe compression fittings
Cutting the end square - important for making the seal work


eight acres: how to use ag pipe compression fittings
Filing the end

eight acres: how to use ag pipe compression fittings
putting it together

eight acres: how to use ag pipe compression fittings
Tightening the fitting

eight acres: how to use ag pipe compression fittings
The finished product

Comments

  1. very patient man your pete! thanx for showing the step by step, very handy & informative
    have a great day

    ReplyDelete
  2. Filing the end....that is the step I always miss. Bother it.

    ReplyDelete
  3. Good job Pete now a star of the internet. It is so good to have a handy husband and Pete certainly is that. Great instructions.

    ReplyDelete
  4. Interesting information and great to have such a handy husband and taking photos of the job equally important...in his senile days he can refer to your internet post from the old days...ha ha ...have a good week. Regards Kathy A, Brisbane

    ReplyDelete

Post a Comment

Thanks, I appreciate all your comments, suggestions and questions, but I don't always get time to reply right away. If you need me to reply personally to a question, please leave your email address in the comment or in your profile, or email me directly on eight.acres.liz at gmail.com

Popular posts from this blog

Chicken tractor guest post

Sign up for my weekly email updates here , you will find out more about chickens, soap and our farmlife, straight to your inbox, never miss a post!  New soap website and shop opening soon.... Tanya from Lovely Greens invited me to write a guest post on chicken tractors for her blog.  I can't believe how many page views I get for chicken tractors, they seem to be a real area of interest and I hope that the information on my blog has helped people.  I find that when I use something everyday, I forget the details that other people may not be aware of, so in this post for Tanya, I tried to just write everything I could think of that I haven't covered in previous posts.  I tried to explain everything we do and why, so that people in other locations and situations can figure out how best to use chicken tractors with their own chickens. The dogs like to hang out behind the chicken tractors and eat chicken poo.  Dogs are gross! If you want to read more about chicken tractor

The new Eight Acres website is live!

Very soon this blogspot address will automatically redirect to the new Eight Acres site, but in the meantime, you can check it out here .  You will find all my soaps, ebooks and beeswax/honey products there, as well as the blog (needs a tidy up, but its all there!).  I will be gradually updating all my social media links and updating and sharing blog posts over the next few months.  I'm very excited to share this new website with you!

Garden Update - July 2013

This month I'm joining the Garden Share Collective , which was started last month by Lizzie from Strayed from the Table , to allow vege gardeners to share their successes and failures and generally encourage everyone to grow more of their own food organically.  This first month, I'll give a detailed update on everything that's growing in my garden, for anyone who hasn't been following for long.  I'll do my normal farm update on Tuesday as well. If you've just joined me, welcome to my vege garden.  I recently wrote about gardening in our sub-tropical climate , so if you're wondering about the huge shade structure, that's for protecting the garden during our hot, humid summers.  At the moment though, the garden is full of brassicas, which grow best here in winter, and are suitably frost-proof.  The garden is about 12 m long by 5 m wide, and surrounded in chicken mesh to keep out the chickens and the bandicoots.  The garden has spilled out around the edg